- Universidad Piloto de Colombia
- Trabajos de grado - Pregrado
- Facultad de Ingenierías
- Ingeniería Civil
- View Item
Diseño y construcción del equipo de laboratorio para el ensayo de descarga por orificio

View/ Open
Date
2018Author
Santos Tibaduiza, Diego Ricardo
Ramírez Goyeneche, Andrés Felipe
xmlui.dri2xhtml.METS-1.0.item-advisor
Santamaria Alzate, Felipe / Director
Metadata
Show full item recordAbstract
Este documento presenta el diseño, elaboración y puesta en funcionamiento de un equipo
de laboratorio para desarrollar la práctica de Descarga por Orificio. La práctica tiene
como objetivo principal, determinar coeficientes característicos de la salida de un caudal
de agua por un orificio y su velocidad de descarga a diferentes alturas. Esta práctica está
destinada para el laboratorio de la asignatura Mecánica de Fluidos, en el tema de “Flujo
de los Fluidos”, de la Facultad de Ingeniería Civil de la Universidad Piloto de Colombia.
El método analítico y la teoría consultada en textos, permitió analizar y determinar las
ecuaciones necesarias para efectuar el cálculo de los coeficientes esperados para el
ensayo, como también, aporto el método de obtención y tratamiento de los datos
capturados por medio del proceso de ensayos de laboratorio realizados, con más de 100
lecturas obtenidas con el equipo instalado en el laboratorio de la Universidad.
Los resultados de los ensayos de laboratorio buscan verificar la Eficacia del equipo, que
debe estar dentro de un 80 a un 95 % dependiendo de la experiencia del laboratorista y
seguimiento del manual de procedimiento.
La razón más importante para la elaboración del equipo es la contribución al desarrollo
practico y teórico de los temas vistos por lo estudiantes de ingeniería civil en sus
competencias académicas. Design, manufacturing and operation of the laboratory´s equipment to develop hole discharge
practice. The main practice's objective is obtained characteristic coefficients through a hole of the
output of water flow and its discharge speed at different heights. This practice is for fluid mechanics
lab about the topic "flow of the Fluids ", of Civil Engineering Faculty from the Universidad Piloto
de Colombia.
The analytical method and the theory on texts, allowed to analyze and it allowed analyzing and
determining the necessary equations to do calculation of the expected coefficients to the test, also,
contributed the collection method and captured data treatment through the process of laboratory
tests, with more than 100 data obtained with the installed equipment in the University´s laboratory.
The results from laboratory´s tests want to verify the efficiency of the equipment, that must be inside
80 to 95% depending of the laboratory’s man experience and follow-up to procedure manual.
The most important reason for production of the laboratory´s equipment, it´s the contribution to
practical and theoretical development of the topics seen in academic competitions all civil
engineering students
Collections
- Ingeniería Civil [310]