- Universidad Piloto de Colombia
- Trabajos de grado - Pregrado
- Facultad de Ingenierías
- Ingeniería Mecatrónica
- View Item
Sistema informativo audible para usuarios de los buses urbanos del sitp
View/ Open
Date
2017-08-25Author
Rodríguez Mariño, Hernán David
De Salvador Rueda, Sergio Daniel
xmlui.dri2xhtml.METS-1.0.item-advisor
Jinete Gómez, Marco Antonio / Director
Metadata
Show full item recordAbstract
La movilidad en cuanto a medios de transporte en la ciudad de Bogotá siempre ha sido un
tema complejo y de mucha atención para cada gobernante de esta ciudad, a lo largo de la
historia se han implementado distintos medios de transportes para la movilidad del
ciudadano promedio, el medio más reciente y que está en uso en este momento es el
SISTEMA INTEGRADO DE TRANSPORTE PUBLICO (SITP) el cual cuenta con distintos servicios
de transporte, el Transmilenio que se moviliza por las troncales de la ciudad, el alimentador
que se moviliza de barrios a las estaciones de Transmilenio, los buses urbanos que se
movilizan por las principales vías de la ciudad y otros complementarios como especiales,
ciclo parqueaderos, entre otros. Cada sistema del SITP está diseñado bajo unas leyes y
normas que se deben cumplir para los beneficios de cada persona de esta ciudad, es aquí
donde sistemas como estos deben tener en cuenta todo tipo de personas, como las
personas que tengan alguna discapacidad ya sea de cualquier tipo que no les permita tener
acceso fácil a estos medios de transporte, por eso el SITP cuenta con algunas ayudas para
la inclusión de personas discapacitadas en el transporte público como se verá en el capítulo
2 de este trabajo, estas ayudas se evidencian por medio de señalamientos en las estaciones,
obras para el acceso de cualquier persona a ellas entre otras, sin embargo con todas estas
posibilidades que ofrece este sistema se realizó una investigación por medio de entidades
como el INCI (Instituto Nacional Para Ciegos) para saber cuántas personas con discapacidad
visual usan los medios de transporte en Bogotá, se hizo una visita a la entidad y de esto se
obtuvieron datos como los siguientes, se encontró que alrededor del 80% de estas personas
utilizan los medios de transportes, y cerca de un 60% de esta población utiliza transporte
SITP es decir Trasmilenio, buses urbanos, entre otros. Las personas con discapacidad visual
que utilizan los buses urbanos por más de que existan obras para el acceso a las estaciones
y señalamientos, se les dificulta bastante poder parar un bus, luego montarse en él y por
ultimo bajarse donde esta lo necesite, de aquí es donde surge la idea de ayudar por medio
de la tecnología a las personas con discapacidad visual a poder movilizarse en los buses
urbanos del SITP sin ningún problema y de un modo muy asequible.
Este proyecto trata de diseñar e implementar un dispositivo electrónico capaz de avisar al
conductor de un bus urbano del SITP que una persona con discapacidad visual necesita de
sus servicios en la estación en la que ella se encuentre, también se diseña una aplicación en
la que la persona invidente tenga todas las opciones y facilidades para solicitar la ruta
necesaria y en la estación que se desee.
Primero se comenzó a diseñar el dispositivo electrónico, aquí es donde se escogió hacer la
comunicación entre la aplicación y el prototipo electrónico ubicado dentro del bus por
medio de la tecnología GSM/GPRS que viene siendo el sistema que comunica a los celulares
a nivel mundial, para esto se escogió el Módulo SIM808 compatible con el software y las
placas de Arduino, este es un módulo que cuenta con esta tecnología y que permite usar
tarjetas SIM convirtiendo el Arduino prácticamente en un teléfono celular permitiendo la
trasmisión de datos que se necesitan, una vez conociendo a fondo los alcances y funciones
13
de este dispositivo con distintas pruebas se implementó para recibir la ubicación exacta del
usuario, es decir que el usuario manda una señal por medio de una aplicación y el conductor
sabe en qué estación esta y que debe para ahí y esperar a que la persona con discapacidad
se suba con total tranquilidad, en este punto se procedió al diseño de la aplicación, por
medio del programa inventor, la aplicación cuenta con una amplia base de datos de todas
las estación de los buses urbanos del SITP y sus diferentes rutas para movilizarse por la
ciudad, cuenta con una interfaz cómoda que se puede usar completamente por medio del
TalkBack para el uso de las personas invidentes, su función es que el usuario indique la
estación y la ruta requerida por él y apenas se encuentre en la estación la aplicación manda
la señal al ModuloSIM y avisando al conductor la parada que debe realizar. Por último, se
realizó el diseño mecánico el cual se construyó en acrílico y con medida para poder ubicarlo
cómodamente en el bus y no sea un estorbo para la vista, etc.
Este proyecto es la unión entre la tecnología y la mejor calidad de vida para personas que
necesitan este tipo de ayudas y con esto logra que se sientan cada vez en igualdad de
condiciones frente a todas las personas y así construir una sociedad con menos
discriminación y más oportunidades para todos. Mobility in terms of transportation in the city of Bogota has always been a complex issue
and a lot of attention for every ruler of this city, throughout the history have been
implemented different means of transport for the mobility of the average citizen, The most
recent and currently in use is the INTEGRATED PUBLIC TRANSPORT SYSTEM (SITP) which has
different transport services, the Transmilenio that is mobilized by the trunk of the city, the
feeder that mobilizes neighborhoods To the stations of Transmilenio, the urban buses that
are mobilized by the main roads of the city and others as complementary as special, cycle
parking, among others. Each system of the SITP is designed under laws and standards that
must be met for each person of this city, it is here where systems such as these should take
into account all types of people, such as people who have any disability of any kind Not
allow them easy access to these means of transport, that is why the SITP has some
assistance for the inclusion of disabled people in public transport as will be seen in Chapter
2 of this work, these aids are evidenced by indications in The stations, works for the access
of any person to the stations, among others, however with all these possibilities offered by
this system, an investigation was carried out through entities such as INCI (National Institute
for the Blind) to know how many people with disabilities Visual use of transportation in
Bogotá, it was found that 80% of these people use the means of transportation, and 60%
Of this population uses SITP transport in trasmilenio, urban buses, among others, visually
impaired people who use urban buses for more than there are works for access to stations
and signs are difficult enough power for a bus then set up In it and finally to go down where
14
it needs it, this is where the idea of helping through technology to the people with visual
disability to be mobilized in the urban buses of the SITP without any problem and in a very
affordable way.
This project tries to design and implement an electronic device to warn the driver of an
urban bus of the SITP that a person with visual impairment needs his services at the station
where he is, also designs an application in which the Blind person has all the options and
facilities to request the necessary route and at the desired station.
First, we started designing the electronic device, this is where we chose to make the
communication between the application and the electronic prototype located inside the
bus by means of GSM / GPRS technology that has been the system that communicates to
the cell phones worldwide, For this the SIM808 Module was chosen compatible with
Arduino, this is a module that counts on this technology and that allows to use SIM cards
making the Arduino practically in a cell phone allowing the transmission of data that are
needed, once knowing in depth the reaches And functions of this device with different tests
was implemented to receive the exact location of the user, that is to say that the user sends
a signal through an application and the driver knows which station is and should be there
and wait for the person With disabilities is raised quietly, at this point proceeded to the
design of the application, through the program inven The SITP's urban bus station and its
different routes to move around the city, it has a comfortable interface that can be used
completely through TalkBack for the use of Blind people, its function is for the user to
indicate the station and the route required by him and as soon as he is at the station, the
application sends the signal to the ModuloSIM and notifies the driver of the stop that must
be made. Finally, the mechanical design was made which was built in acrylic and with
measure to be able to place it comfortably on the bus and is not a hindrance to the sight,
etc.
This project is the link between technology and the best quality of life for people who need
this type of aid and this makes them feel increasingly equal to all people and thus build a
society with less discrimination and more Opportunities for all.
Collections
- Ingeniería Mecatrónica [163]