- Universidad Piloto de Colombia
- Trabajos de grado - Pregrado
- Facultad de Ingenierías
- Ingeniería Mecatrónica
- View Item
Diseño y construcción de un prototipo de mesa CNC. Cortadora de platina-PSYCO 4.20

View/ Open
Date
2017-05-23Author
Rodríguez Marín, Sandra Carolina
Cárdenas Bocanegra, Sergio Eduardo
Posso Vásquez, Christián Leonel
xmlui.dri2xhtml.METS-1.0.item-advisor
González Villarraga, Carlos Héctor / Director
Metadata
Show full item recordAbstract
En la industria, procedimientos industriales como cortes de metales, acabado de una
pieza después de un corte, el material con el cual se va a trabajar y el tipo de
herramienta de corte, se ven interferidos por el hecho de que cada producto debe
cumplir con estándares de calidad, reducciones de tiempos en producción y reducción
de emisiones tóxicas respiradas por el operario. Además, no todas las piezas que se
quieren hacer contienen formas geométricas básicas como triángulos, cuadrados y
círculos, por el contrario, algunas piezas además de estar conformadas por todas las
figuras básicas, contienen arcos y agujeros en diferentes relaciones, lo cual hace del
proceso de corte un proceso de alta complejidad.
Teniendo en cuenta esta problemática, el siguiente proyecto de grado propone el
diseño de una mesa de corte para platinas CNC, con el objetivo de optimizar todas las
tareas correspondientes al corte de platinas tales como: facilidad de operación, corte
de precisión, reducción de tiempos y piezas complejas para lo cual es necesario
diseñar un mecanismo de acuerdo a estos requerimientos. Para obtener estos
resultados, es indispensable el diseño mecánico y de deslizamiento para los distintos
ejes de la máquina. Para el diseño mecánico, se estudian diferentes alternativas, una
de estas es que el movimiento de los ejes de la máquina dependa del sistema de
transferencia de los motores y el espacio de corte de la mesa. Con esto, el sistema de
desplazamiento puede ser diseñado de una forma que determine el mínimo
movimiento producido por las vibraciones de los motores y permita que la exactitud
del corte sea combinada con la reducción de la vibración. La selección del sistema
que se propone en esta tesis integra la parte electrónica y de diseño con la parte
mecánica, es un aplicativo que proporciona una mayor facilidad y practicidad de la
máquina a la hora de cortar, para que de esta manera el usuario tenga una conexión
con el diseño que se cree y la máquina de corte, la cual convierte el plano en vectores
de dibujo y transformándolo en movimiento para los 3 ejes de la máquina.
Cabe resaltar que esta máquina es diseñada con materiales de bajo costo y materiales
de reutilización, para reducir en costos y que sea de fácil acceso para pequeñas
industrias. In the industrial sector, industrial processes such as metal cutting, finishing of a piece
after a cut, the material with which the piece is going to be made and the type of the
cutting tools, are interfered by the fact that each product must satisfy quality standards,
reductions in production times and reduction of toxic emissions breathed by the
operator. In addition, not all the pieces that want to be done contain basic geometric
forms like triangles, squares and circles, on the contrary, some pieces besides of being
conformed by all the basic forms, they contain arcs and holes in different relations,
which makes the process of cutting a process of high complexity.
Taking into account this problem, the following degree project proposes the design of
a cutting table for CNC plates, with the aim of optimizing all the tasks that are included
in the cutting of platinum process such as: facility on the operation, precision cutting,
reduction of times and complex parts, for which it is necessary to design a mechanism
according to these requirements. To obtain these results, the mechanical and sliding
design for the different axes of the machine is essential. For the mechanical design,
different alternatives are studied, one of these is that the movement of the axes of the
machine depends on the transfer system of the motors and the space of cutting of the
table. With this, the system of displacement can be designed in a certain way that can
determine the minimum movement produced by the vibrations of the motors and allows
the accuracy of the cut to be combined with the reduction of vibration. The selection of
the system proposed in this thesis integrates the electronic and design part with the
mechanical part, it is an application that provides more facility and practicality of the
machine when cutting, so that the user has a certain kind of connection with the design
that is going to be created and the cutting machine, which converts the plane into
drawing vectors and then it transforms it into movement for the 3 axes of the machine.
It is worth to mention, that this machine is designed with low cost and reuse materials,
in order to reduce costs and to make it accessible to small industries.
Collections
- Ingeniería Mecatrónica [155]